top of page

Geo-Con provides the complete product line to meet all your HDPE drainage needs - the full range of diameters,

  • Geo-Con provides the complete product line to meet all your HDPE drainage needs - the full range of diameters, single-wall and dual-wall productions, options for standard perforated patterns, and custom fabricated fittings. Geo-Con's HDPE pipe offerings can meet all the subsurface drainage demands of your site, building, roads and pavements. Whether made from prime virgin resins or with recycled materials, Geo-Con's HDPE pipe has the strength and service life needed for your project.

  • Specify HD100 and HD100EC Pipe
    HD100 and HD100EC are today’s top two standard corrugated polyethylene drainage pipes featuring a dual wall, a smooth interior and the century-long service life your customers deserve.

  • Specify HD100 to meet AASHTO M252 or M294
    HD100 exceeds the AASHTO standards by using 100% virgin resins with enhanced long-term properties. Geo-Con’s higher material standards are aimed to ensure a minimum 100-year service life.

  • Specify HD100EC to meet ASTM F2648
    HD100EC exceeds ASTM F2648 by using an engineered compound with better long-term properties than required by ASTM and AASHTO. The engineered compound is designed to produce material properties capable of passing the industry’s 100-year service life protocol.

  • HD Tough
    High Density PE - Exceeds material, performance and testing standards
    Heavy Duty Pipe - Easily withstands the rigorous demands of the construction process
    High Durability - Chemically inert with high stress crack and oxidation resistance

  • Give it 100%
    100% virgin resin (HD100 only)
    Minimum 100-year service life
    A Manning’s roughness coefficient as low as 0.0100 

  • HD100EC is Green, But Costs You Less of it:
    Produced from an Engineered Compound utilizing recycled resins
    Eco-friendly product for the Environmentally Conscious
    Use of recycled resins produces an Efficient Cost material

  • Manning’s N-Value for Design
    Tests consistently show a Manning’s n in the range of 0.009 to 0.011. The major investigation (2005 Utah State University) recognized an effective Manning’s n as low as 0.0100. Manning’s n for design is conservatively factored to 0.012 for in-service performance.

  • Joint Performance
    Bell and spigot joints with a factory-installed gasket meet the watertight requirements of ASTM D3212 (laboratory pressure tested at 10.8 psi).

  • Why Would You Use Concrete Pipe? When HDPE Pipe:

  • Is more economical in every respect.

  • Has a high strength to weight ratio.

  • Has longer pipe lengths and a lightweight construction for quicker installation times.

  • Has less shipping and handling concerns and no need for heavy lifting equipment.

  • Has greater resistance to corrosion and a longer service life.

  • Can function with a pH as low as 2 when concrete pipe is limited to sites greater than 5.

  • Has fewer joints (i.e. fewer problems).

  • Is not easily damaged during handling and shipping.

  • Does not have a reduced wall thickness and a reduced strength at the joint.

bottom of page